Перейти к основному содержанию
Помощь
Редактирование шага 9 —

Тип шага:

Перетащите чтобы изменить порядок

Pull and remove the final adhesive strip.

The strip may fling the battery when it separates from the iPhone, so hold your hand over the battery to secure it—but don't press down on the battery itself, or the added pressure may cause the adhesive strip to break off underneath the battery.

If you removed all four adhesive strips successfully, skip the next step.

If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.

For an alternative method to unstick the battery from the case, continue with the next step below.

Ваш вклад лицензируется под свободной лицензией Creative Commons.