Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently pull the sticker away from the battery connector, just enough so that the connector is visible.

Wedge a plastic opening tool in between the connector and logic board, and gently pull the connector upwards.

Make sure not to disconnect the white connector socket on the logic board, and just the connector itself.

Ваш вклад лицензируется под свободной лицензией Creative Commons.