Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case.

Be sure not to yank it out, as it is soldered to the logic board.

Flip the battery over to straighten its cable and set it down.

Ваш вклад лицензируется под свободной лицензией Creative Commons.