Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Flip the logic board assembly back over to expose the connectors on the back.

Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.

This cable is very delicate; be careful not to stress the point where it connects to the antenna.

Ваш вклад лицензируется под свободной лицензией Creative Commons.