Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Be very careful when performing this procedure! If you put too much pressure on the display, you risk cracking it.

Wedge a plastic opening tool between the plastic front panel and display. Be very careful that you wedge it in the same location shown in the first picture.

Slide the plastic opening tool across the length of the display. This should loosen the glue binding the display to the plastic front panel.

Rotate the display 180 degrees and free the bottom side of the display in the same manner.

Ваш вклад лицензируется под свободной лицензией Creative Commons.