Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the flat end of a spudger between the front bezel and the plastic strip attached to the rear bezel near the screw holes at the bottom corners of the display.

Rotate your spudger toward the rear bezel to separate it from the front bezel.

If necessary, enlarge the gap between the lower edge of the rear bezel and the clutch cover until the two components are completely separated.

Ваш вклад лицензируется под свободной лицензией Creative Commons.