Skip to main content
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a T5 Torx driver to remove the 13 screws securing the trackpad assembly:

Nine 5.8 mm screws

Four 4.9 mm screws

These screws look very similar, so don't mix them up.

These screws can loosen over time due to the clicking action on the Force Touch trackpad. Adding a little blue threadlocker as you install them can help keep them secure.

Install the screws loosely and check the trackpad alignment before tightening them down.

Ваш вклад лицензируется под свободной лицензией Creative Commons.