Перейти к основному содержанию
Помощь
Редактирование шага 27 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

Lifting from the left side, remove the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.