Перейти к основному содержанию
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets.

Make sure you are flipping up the retaining flaps, not the sockets themselves.

Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.