Skip to main content
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the plastic screw cover located on the bottom of the device. Insert a small flat-headed screwdriver into one side of the cover and gently ease it out. Repeat on the other side.

Be gentle when removing the screw cover as it is brittle and will break if forced.

You will need a #00 Phillips screwdriver to remove the two 2.6 mm screws that are exposed.

Ваш вклад лицензируется под свободной лицензией Creative Commons.