Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

This may be difficult to move, so take your time and be careful.

The ribbon cable is held in place by a black latch on the hard drive.

Using a small flat head screwdriver, flip the black latch up 90 degrees.

Make sure you are only flipping the black latch. Do not try to lift any wires or the white connector piece.

Ваш вклад лицензируется под свободной лицензией Creative Commons.