Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to free the adhesive loop securing the I/O board power cable to the upper case.

Disconnect the I/O board by pulling the power cable away from its socket on the logic board.

Pull the cable parallel to the face of the logic board toward the front edge of the Air.

Ваш вклад лицензируется под свободной лицензией Creative Commons.