Перейти к основному содержанию
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert a thin blade or pry tool into the camera notch at the top of the display.

The gap where you can safely insert a tool is only about 5 mm wide. If you hit the LCD with your tool, you will damage it.

Use your suction cup and blade or pry tool to widen the gap at the top of the display until you can insert a second tool under the glass, closer to the corner.

Ваш вклад лицензируется под свободной лицензией Creative Commons.