Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Now the back cover is off and the battery is removed, so the hard drive is clearly visible.

There are four 4.2 mm screws securing the hard drive to the logic board.

Remove all four screws using a Phillips #00 screwdriver.

Don't lose any of the screws! If necessary, use a magnetized screw driver.

Ваш вклад лицензируется под свободной лицензией Creative Commons.