Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 11 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the flat end of a spudger between the front bezel and the plastic strip attached to the rear bezel near the screw holes at the bottom corners of the display.

Rotate your spudger toward the rear bezel to separate it from the front bezel.

If necessary, continue separating the left edge of the rear bezel off the tabs on the front display bezel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.