Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

With the case and battery removed from the midframe, begin removing all cables attached to the motherboard.

Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner.

Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.

Proceed counterclockwise to the next cable and repeat. Small flex cable on the bottom won't need cable tensioner lifted, just carefully pull out.

Ваш вклад лицензируется под свободной лицензией Creative Commons.