Skip to main content
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 11 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the flat end of a spudger into the gap between the rear display bezel and the clutch cover.

Twist the spudger to separate the lower edge of the rear display bezel from the clutch cover.

Work along the lower edge of the rear bezel until it is evenly separated from the clutch cover.

Ваш вклад лицензируется под свободной лицензией Creative Commons.