Перейти к основному содержанию
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Do not put any excessive strain on the LED driver cable ground loop. It is a very thin and delicate wire that is easily broken.

Disconnect the LED driver cable by pulling its connector away from the socket on the inverter board.

Remove the LED driver board and set it aside.

Ваш вклад лицензируется под свободной лицензией Creative Commons.