Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Тип шага:

Перетащите чтобы изменить порядок

In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw.

We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw.

You want the cut to be deep enough that you can fit a flathead screwdriver into it, but thin enough that the screwdriver has something to grip.

Make a single thin cut into the head of the stripped screw.

Ваш вклад лицензируется под свободной лицензией Creative Commons.