Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If present, remove the piece of tape on the dock connector cable with a plastic opening tool.

Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

Peel the dock connector ribbon cable off the rear panel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.