Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

Peel the dock connector ribbon cable off the rear case.

Do not try to completely remove the cable, as it is still securely attached to the rear case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.