Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 14 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Using the tip of the spudger, flip up the retaining flap on the microphone cable ZIF connector.

Insert the tip of the spudger underneath the microphone ribbon cable, removing it from its ZIF connector.

Slide the spudger to the left, releasing the adhesive holding the microphone ribbon cable to the headphone jack assembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.