Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently lift the controller port board out of its recess within the bottom case.

Do not completely remove the controller port board. It is still attached via a ribbon cable.

Pull the controller port ribbon cable straight away from its socket on the controller port board.

Remove the controller port board out of the bottom case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.