Skip to main content
Help
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the edge of a spudger in between the trigger and the trigger assembly near the left edge. Pry the housing away from the catch on the trigger.

Using the previously described technique, pry the housing on the right edge away from the trigger.

Rotate the trigger away from the logic board, past its housing.

Ваш вклад лицензируется под свободной лицензией Creative Commons.