Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot.

These are not captive panel screws and, once loosened, will be free to move about the assembly.

Be careful not to allow loosened fasteners into the CPU fan and duct (located in the upper left).

Ваш вклад лицензируется под свободной лицензией Creative Commons.