Skip to main content
Help
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the four 6.4 mm Phillips #1 screws holding the adapter to the outer case.

Only remove the following screws if you are planning on taking apart the iPod Adapter later on:

Two 6.4 mm Phillips #1 screws near the center of the adapter. These screws have built in washers.

One 4.0 mm Phillips #1 screw near the center of the adapter.

The iPod adapter should now be separate from the upper casing.

Ваш вклад лицензируется под свободной лицензией Creative Commons.