Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Turn the iHome 180 degrees and carefully pull up on speaker cases to pry them loose from the bottom case.

Prying the Motherboard Assembly from the Upper Case will require a good amount of force. Be very careful not to break the case, or yank on any of the ribbon wires attached to the underside.

Pulling outwards on the sides of the Upper Casing can help loosen the assembly.

If it seems too difficult to remove, chances are that a screw is still attached. Make sure you've removed every screw listed before proceeding to this step.

Pull the back adapter cover off.

Ваш вклад лицензируется под свободной лицензией Creative Commons.