Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 12 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to pry the subwoofer/right speaker cable connector up off its socket on the logic board.

Be very careful to pry under the connector as shown, and not under the socket itself. Otherwise you may accidentally separate the socket from the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.