Locate and remove 5x Logic Board Screws

3x 3.4mm Torx T5 screws

1x 3.6mm Torx T5 stepped screw

1x 3.3mm hex standoff (3mm drive)

During Reassembly: It may be difficult to screw the top left logic board standoff back in. If you are finding it hard to do this, take the 1.4mm screw that we removed to remove the power button bracket and screw it into the top left logic board standoff. Afterwards, take the now "cyborg" screw and screw it into the logic board.

Don't forget to remove the 1.4mm screw from the logic board standoff during reassembly