Перейти к основному содержанию
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

Insert the corner of a plastic card between the lower end of the battery and the frame.

Press the card until approximately an inch and a half of it is underneath the battery.

Take care not to bend the battery—a bent battery may leak dangerous chemicals or cause a thermal event.

Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

Ваш вклад лицензируется под свободной лицензией Creative Commons.