Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

NOTE: If you are not replacing the LCD screen, move on to the next step.

After removing the original screen, keep the logic board facing you the way it was.

Take the new screen and slip the flexible piece of connecting circuitry under the grey plastic flap that you pried up in step 10.

Handle the screen carefully as it is fragile.

Push it gently but firmly until it does not move any further to the left, then close the grey flap.

After this, the screen can be pushed down and clicked back into place.

To reassemble the phone, reverse instructions.

Ваш вклад лицензируется под свободной лицензией Creative Commons.