Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up.

Gently pull the ribbon from the logic board with tweezers.

With the ribbon disconnected, the back casing should now be detached from the rest of the camera.

Ваш вклад лицензируется под свободной лицензией Creative Commons.