Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove 1ea M2.5 x 8mm screw holding the EMI shield in place

Remove the EMI shield to expose the LCD ribbon cable

Gently pull up on the tab to disconnect the ribbon cable from the main board

Close the lid carefully and remove the two M2.5 x 5-mm screws from the rear of the case

Ваш вклад лицензируется под свободной лицензией Creative Commons.