Перейти к основному содержанию
Помощь

How to disconnect the Logic Board in the iPhone SE 2022

Редактирование шага 13 —

% 1 Примечание:% 2 Сейчас вы редактируете исходное руководство для только что просматриваемого руководства. Любые внесённые вами изменения влияют на все направляющие% 3, включающие данный шаг.

Тип шага:

Перетащите чтобы изменить порядок

Unfasten the four screws securing the logic board:

One 1.7 mm-long Phillips screw

One partially threaded 1.7 mm-long Phillips screw

This screw is covered by protective foam surrounding the rear camera connector. Use a pair of tweezers to peel just enough foam off to unfasten the screw.

One 2.5 mm-long standoff screw

One 2.2 mm-long standoff screw

Ваш вклад лицензируется под свободной лицензией Creative Commons .