Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently lift the end of the SSD about half an inch and pull it straight out of its socket on the logic board.

Don't lift the SSD more than half an inch—doing so may damage the SSD or its socket on the logic board.

When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

Ваш вклад лицензируется под свободной лицензией Creative Commons.