Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The following connector has an especially deep socket. Use care when disconnecting it.

While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.

Remove the I/O board cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.