Skip to main content
Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 20 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Using the sharp end of a spudger, disconnect the connector for the blue and white power cables. Again, be careful to pry up only on the connector.

It is very easy to break the connector from the board, so be careful.

The key is to apply force in two directions, down to keep the surface board connections intact, up to release the connector.

The upper case is now free and can be removed from the computer.

Ваш вклад лицензируется под свободной лицензией Creative Commons.