Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 20 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following 7 screws from the edges of the keyboard area.

Three 2 mm Phillips along the right edge.

One 4.5 mm Phillips underneath where the magnet was.

One 6 mm Phillips with a small head in the lower left corner.

Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle.

Ваш вклад лицензируется под свободной лицензией Creative Commons.