Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 13 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).

If you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

Ваш вклад лицензируется под свободной лицензией Creative Commons.