Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently peel the inverter cable ground strap off the cast aluminum frame of the clutch hinges.

While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.

If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces.

Ваш вклад лицензируется под свободной лицензией Creative Commons.