Перейти к основному содержанию
Помощь
Редактирование шага 23 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 43 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If you are replacing the display panel, you may need to transfer additional components from the old panel to the new one. Compare the back of the old display with the replacement display. Note all cables, sensors, and foam cushioning that are missing from the new display.

If there is a wire or cable underneath adhesive tape, always pull the tape off first.

If the cable is glued to the chassis, use a heated iOpener or a hair dryer to soften the adhesive first. You can then slide an opening pick underneath the cable to loosen it. Never pull directly on the delicate connectors.

Slide an opening pick underneath the foam cushion pieces to separate them from the display, and gently pull them off. You may need some double sided tape to re-attach them to the new display.

Ваш вклад лицензируется под свободной лицензией Creative Commons.