Перейти к основному содержанию
Помощь
Редактирование шага 18 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

With both plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.

If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the remaining adhesive.

Begin to lift the top of the display up from the frame.

Only lift the display a few inches—the display data and power cables are still connected to the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.