Skip to main content
Help
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Starting where the last pass left off, insert the metal spudger another two inches underneath the battery.

As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery.

Repeat this process for the remaining adhesive strips.

Ваш вклад лицензируется под свободной лицензией Creative Commons.