Перейти к основному содержанию
Помощь
Редактирование шага 9 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.

If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces.

Ваш вклад лицензируется под свободной лицензией Creative Commons.