Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 38 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame.

While holding the LCD with one hand, insert the flat end of a spudger between the LCD and tape on the iPad's right side.

Slide the spudger outward, separating the tape, while gently lifting up on the LCD to pull it away from the tape.

It may help to twist the spudger, to spread the gap the rest of the way and separate the LCD from the tape.

Ваш вклад лицензируется под свободной лицензией Creative Commons.