Skip to main content
Помощь
Редактирование шага 18 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following screws:

Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.

Two 8 mm T6 Torx screws securing the DC-In board to the upper case.

Do not remove the logic board yet! There are components on the underside of the logic board attached to the the upper case that must first be disconnected.

Ваш вклад лицензируется под свободной лицензией Creative Commons.