Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In the following steps, you will be placing the remaining pieces of adhesive on the front panel.

Do not peel the clear backing off the strips just yet.

Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.

Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.