Перейти к основному содержанию
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If you are replacing the hard drive with a new drive, remove the four screws that mount the 3. drive to the carrier and mount the new drive in the carrier.

Important: Hold the drive by its sides. Be careful not to touch the printed circuit board on the bottom of the drive.

Replacement Note: Slide the carrier and drive over the guides and into the drive bay, until you feel the drive snap into place.

Ваш вклад лицензируется под свободной лицензией Creative Commons.