Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Plug the included sensor-enabled SATA power cable into the wide side of the enclosure's SATA connector.

The cable is keyed to connect in only one way. If you can't connect the cable, rotate it 180°, and try again.

Ваш вклад лицензируется под свободной лицензией Creative Commons.