Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Peel the backing off of the adhesive back of the small temperature sensor board.

Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.

Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

Ваш вклад лицензируется под свободной лицензией Creative Commons.